This document serves as a comprehensive guide for individuals operating and maintaining the Kubota L3901 tractor. It furnishes detailed instructions on operation, maintenance schedules, troubleshooting, safety protocols, and specifications relevant to the machine’s optimal performance and longevity. For instance, it explains how to properly prepare the tractor for different tasks like mowing or tilling, and outlines recommended oil change intervals.
The value of this documentation resides in its ability to empower users to perform routine maintenance tasks competently, extending the tractor’s lifespan, and minimizing potential downtime. Adhering to the prescribed guidelines contained within contributes significantly to the safe and efficient operation of the equipment. Historically, such manuals have been vital resources, promoting self-reliance and reducing dependence on professional servicing for common issues.
The subsequent sections will delve into specific aspects covered by this essential resource, encompassing preventative maintenance procedures, operational techniques, component identification, and relevant safety advisories to ensure user familiarity and promote the responsible use of the Kubota L3901.
1. Safety precautions
The narrative of a farm often includes tales of near misses, or worse, incidents that could have been prevented. Within the pages of a Kubota L3901 guide resides a critical chapter: safety precautions. This section is not merely a formality; it is a lifeline, a compendium of wisdom gleaned from experience and the inevitable lessons of machinery operation. It details potential hazardsrollover risks on uneven terrain, the dangers of operating with impaired visibility, the catastrophic consequences of ignoring PTO shieldingand provides concrete measures to mitigate them. Ignoring this section is akin to navigating a minefield blindfolded. Each caution listed reflects real-world scenarios where negligence has led to injury or even fatalities. The guide does not simply state “be careful”; it elucidates precisely how to be careful, with specific instructions on seatbelt use, pre-operation inspections, and safe dismounting procedures.
Consider the scenario of a field overgrown with vegetation. Without consulting the guide, an operator might impulsively engage the mower at full throttle, unaware of the hidden dangers lurking beneath the surfacedebris that could be ejected with lethal force, or unstable ground conditions that could lead to a loss of control. The manuals detailed instructions on pre-mowing inspection and appropriate speed selection serve as a crucial buffer against such risks. Or envision an operator attempting to perform maintenance without properly disengaging the engine and hydraulic systems. The manual’s explicit warnings against this practice underscore the potential for severe injury from unexpected machine movement. This extends beyond mere operational safety; it encompasses safe storage of fuel, proper handling of hazardous materials, and adherence to environmental regulations.
In essence, the precautions detailed within represent a pact between the manufacturer and the operator, a shared responsibility for safe operation. The manual provides the knowledge; the operator must supply the diligence. The consequences of neglecting these precautions are not merely hypothetical; they are etched in the annals of agricultural accidents. By internalizing and consistently applying these safety guidelines, the operator transforms the Kubota L3901 from a potential hazard into a valuable and reliable tool. The “kubota l3901 owners manual” becomes more than a document; it transforms into a shield.
2. Operating procedures
The sprawling fields of rural America bear witness to the silent partnership between man and machine. Among these machines, the Kubota L3901 stands as a reliable workhorse, its potential fully realized only when wielded with informed precision. The kubota l3901 owners manual becomes the conduit, translating mechanical capabilities into purposeful action, primarily through its comprehensive section on operating procedures. Each lever, pedal, and gauge is given context, transforming from mere metal and plastic into instruments of control. This section is not merely a set of instructions; it is the script for a performance, a choreographed dance between operator and tractor designed to achieve efficiency and, most importantly, safety. One might recall the story of a seasoned farmer who, accustomed to older machinery, initially dismissed the manual. His attempt to engage the PTO without properly understanding the safety interlocks resulted in a near mishap, a stark reminder that even experience is no substitute for informed operation.
Consider the complexities of varying soil conditions. The manual provides specific guidance on adjusting the tractor’s settings to optimize traction and minimize soil compaction, knowledge crucial for preserving the land’s long-term health. Without this understanding, an operator might unknowingly inflict damage, diminishing yields and contributing to erosion. Similarly, the section on loader operation outlines precise techniques for lifting and transporting materials, preventing imbalances and potential rollovers. Each procedure is meticulously detailed, outlining the correct sequence of actions, the appropriate speeds, and the potential hazards. The careful study of these instructions enables the operator to transform the raw power of the tractor into controlled, productive force.
In essence, the operating procedures detailed within the guide are the key to unlocking the Kubota L3901’s full potential. They transform a collection of mechanical parts into a sophisticated tool, capable of performing a wide range of tasks with precision and safety. The kubota l3901 owners manual, in this regard, serves as a silent mentor, guiding the operator through the intricacies of machine operation and ensuring that each task is performed with competence and care. The land, and the operator, benefit from this informed partnership.
3. Maintenance schedule
Within the kubota l3901 owners manual lies a crucial roadmap for longevity and performance: the maintenance schedule. It is not merely a list of tasks; it is a preventative chronicle, a structured regimen designed to preempt the insidious creep of wear and tear. Each entry, each prescribed interval, tells a story of potential failure averted, of downtime avoided, of the machine’s inherent reliability carefully preserved.
-
Engine Oil and Filter Replacement
Consider the engine, the heart of the L3901. The manual stipulates precise intervals for oil and filter changes. Neglecting this seemingly simple task invites catastrophic consequences. Dirty oil, laden with contaminants, becomes an abrasive force, scouring cylinder walls and starving vital components. The farmer who adheres to the schedule, diligently replacing the oil at the recommended intervals, ensures the engine continues to deliver its promised power, year after year. Conversely, the farmer who postpones or ignores this crucial step risks premature engine failure, a costly and debilitating event.
-
Coolant System Flush and Fill
The coolant system, often overlooked, plays a critical role in regulating engine temperature. Over time, coolant degrades, losing its ability to effectively dissipate heat. Scale and corrosion can build up, impeding flow and leading to overheating. The maintenance schedule outlines the proper procedure for flushing and refilling the system with fresh coolant, ensuring optimal engine performance and preventing costly repairs. This seemingly minor task is a bulwark against potential engine damage, safeguarding the heart of the machine from the ravages of heat.
-
Hydraulic Fluid and Filter Service
The hydraulic system powers the loader, the implement lift, and other essential functions. Contaminated hydraulic fluid can damage pumps, cylinders, and valves, leading to decreased performance and potential system failure. The kubota l3901 owners manual provides detailed instructions on checking fluid levels, inspecting for leaks, and replacing the fluid and filter at specified intervals. This proactive maintenance ensures the hydraulic system operates smoothly and reliably, enabling the tractor to perform its intended tasks without interruption.
-
Air Filter Inspection and Replacement
The engine’s air filter is the first line of defense against airborne contaminants. A clogged air filter restricts airflow, reducing engine power and increasing fuel consumption. The manual outlines the procedure for inspecting and cleaning the air filter, and specifies the replacement interval. Maintaining a clean air filter ensures optimal engine performance and prevents premature wear, preserving the tractor’s efficiency and extending its lifespan.
These seemingly disparate tasks, meticulously outlined within the maintenance schedule of the kubota l3901 owners manual, are interwoven threads in a tapestry of preventative care. Adherence to this schedule is not merely a suggestion; it is an investment, a commitment to preserving the value and reliability of the Kubota L3901. The farmer who embraces this proactive approach ensures the tractor remains a steadfast partner, capable of tackling the challenges of each season with unwavering performance.
4. Troubleshooting guides
In the realm of machinery, silence is rarely golden. The sudden cessation of operation, the uncharacteristic shudder, the unfamiliar noise these are the harbingers of trouble. Within the kubota l3901 owners manual, the troubleshooting guides stand as sentinels, ready to diagnose and offer solutions when the mechanical heart of the tractor falters. They are the embodiment of experience distilled, a repository of knowledge accumulated from countless instances of mechanical maladies and their remedies.
-
The Case of the Reluctant Starter
Imagine a crisp autumn morning, the air thick with anticipation of a day’s labor. The key is turned, but instead of the familiar roar, only a disheartening click. The troubleshooting guide, with its methodical approach, leads the operator through a series of checks: battery voltage, connection integrity, starter solenoid function. It’s a systematic unraveling of the problem, transforming frustration into a focused search for the root cause. The guide offers potential solutions, ranging from a simple jump-start to a more involved starter replacement, empowering the operator to take informed action.
-
The Mystery of the Overheating Engine
During the heat of summer, an overheated engine can grind operations to a halt. The troubleshooting guide dissects the cooling system, exploring potential culprits: a low coolant level, a faulty thermostat, a clogged radiator. It provides visual aids and step-by-step instructions, allowing the operator to diagnose the issue with precision. Perhaps it’s a simple matter of adding coolant, or maybe a more complex task of replacing a worn-out thermostat. Regardless, the guide illuminates the path to restoring the engine’s optimal operating temperature.
-
The Enigma of the Hydraulic Leak
A telltale puddle of hydraulic fluid beneath the tractor signals a problem in the hydraulic system. The troubleshooting guide acts as a detective, guiding the operator through an investigation of potential leak sources: damaged hoses, worn seals, loose fittings. It offers advice on repairing or replacing the affected components, ensuring the hydraulic system can continue to deliver its essential power. The guide cautions against neglecting hydraulic leaks, emphasizing the potential for catastrophic failure and environmental contamination.
-
The Puzzle of the Erratic PTO
The power take-off (PTO), essential for operating implements like mowers and tillers, can sometimes exhibit erratic behavior. The troubleshooting guide delves into the PTO system, exploring potential causes: a faulty clutch, a misadjusted linkage, a worn bearing. It provides instructions on diagnosing and resolving these issues, ensuring the PTO can continue to deliver its power reliably. The guide underscores the importance of safety precautions when working with the PTO, warning against potential hazards and emphasizing the need for proper shielding.
These are but a few examples of the problem-solving prowess contained within the troubleshooting guides of the kubota l3901 owners manual. They are the compass and the map for navigating the inevitable challenges of machine operation, transforming potential breakdowns into opportunities for learning and empowerment. By embracing the wisdom contained within these guides, the operator transforms from a mere user into a knowledgeable steward of the machinery, ensuring its continued performance and longevity.
5. Component diagrams
Within the pages of the kubota l3901 owners manual, often tucked between sections on operation and maintenance, lies a critical, yet frequently overlooked, resource: the component diagrams. These are not mere illustrations; they are the anatomical charts of the machine, the blueprints that reveal the inner workings of the L3901, transforming it from a monolithic entity into a collection of identifiable, manageable parts. These diagrams offer a path to understanding, and a vital step for those who seek to troubleshoot, maintain, or repair the tractor.
-
Visual Identification and Part Numbering
The core function of component diagrams is to provide clear visual identification of each part. Every nut, bolt, seal, and sub-assembly is depicted with precision, often in exploded views that reveal their relationships within the larger system. Crucially, each component is assigned a unique part number, cross-referenced within the manual. Consider the scenario of a damaged hydraulic hose. Without the diagram, identifying the correct replacement part becomes a frustrating, time-consuming process. With the diagram, the operator can quickly pinpoint the hose, locate its part number, and order the precise replacement, minimizing downtime.
-
Understanding System Interconnections
Beyond simple identification, component diagrams illuminate the intricate network of connections between systems. Hydraulic lines, electrical wiring, and mechanical linkages are all mapped out, revealing how they interact to achieve the tractor’s intended functions. Imagine attempting to trace an electrical fault without a wiring diagram. The diagrams clarify the path of current, allowing the operator to isolate the problem to a specific circuit or component. This understanding of system interconnections is vital for troubleshooting complex issues and preventing further damage.
-
Facilitating Disassembly and Reassembly
Component diagrams serve as a guide during disassembly and reassembly processes. Whether overhauling an engine or replacing a transmission component, the diagrams provide a visual reference for the correct sequence of steps. They highlight the placement of critical components, the orientation of seals, and the torque specifications for fasteners. Without these diagrams, the risk of incorrect reassembly, leading to further damage or malfunction, is significantly increased. The diagrams transform what might be a daunting task into a manageable process.
-
Supporting Preventative Maintenance
While the maintenance schedule outlines routine tasks, component diagrams enhance preventative maintenance efforts. They allow the operator to visually inspect key components for signs of wear or damage, identifying potential problems before they escalate into major failures. For instance, a diagram of the braking system might reveal a worn brake pad or a leaking brake line, prompting proactive repairs that prevent more serious issues down the road. Component diagrams aid in extending the longevity of the machine.
Therefore, the component diagrams within the kubota l3901 owners manual are not merely decorative additions; they are indispensable tools for understanding, maintaining, and repairing the tractor. They empower operators to take a proactive approach to machine care, minimizing downtime, extending the tractor’s lifespan, and ensuring its continued performance in the demanding world of agriculture.
6. Fluid specifications
The tale of the Kubota L3901 is interwoven with the lifeblood that courses through its mechanical veins: its fluids. The kubota l3901 owners manual serves as the definitive atlas for this circulatory system, precisely detailing the required composition and characteristics of each critical fluid. Failure to adhere to these specifications is not a matter of mere preference; it is an invitation to mechanical decline, a gradual erosion of performance that can culminate in catastrophic failure. For instance, substituting an incorrect hydraulic fluid can compromise the sensitive valving within the system, leading to diminished lifting capacity, erratic implement operation, and ultimately, costly repairs. The consequences resonate beyond mere inconvenience; they impact productivity, profitability, and the overall lifespan of the machine.
The manual meticulously outlines specifications for engine oil, hydraulic fluid, coolant, and transmission fluid, each tailored to the unique demands placed upon these systems. Engine oil, for example, must possess the correct viscosity and additives to effectively lubricate and protect the engine’s internal components under a range of operating temperatures and loads. Coolant must provide adequate freeze protection and corrosion inhibition to prevent damage to the engine block and radiator. Hydraulic fluid must maintain its viscosity and lubricity under high pressure and temperature, ensuring smooth and responsive operation of hydraulic implements. These specifications are not arbitrary; they are the product of extensive testing and engineering designed to optimize the tractor’s performance and longevity. A farmer who heedlessly tops off the hydraulic reservoir with generic fluid risks introducing contaminants, compromising the seals, and accelerating wear throughout the system. The kubota l3901 owners manual acts as a preventative bulwark against such negligent actions, safeguarding the machines vital functions.
Therefore, the section on fluid specifications within the kubota l3901 owners manual represents a critical covenant between the manufacturer and the owner. It provides the precise formula for ensuring the tractor’s health, a formula that, when followed diligently, translates into years of reliable service. Neglecting this guidance is akin to prescribing the wrong medicine a decision that, while seemingly insignificant at first, can have profound and lasting consequences. The correct fluids, meticulously chosen and maintained, are the keys to unlocking the Kubota L3901’s full potential, transforming it from a mere machine into a dependable partner in the pursuit of agricultural success.
7. Warranty information
Within the pages of the kubota l3901 owners manual, a section often approached with a mixture of hope and apprehension, resides the warranty information. This segment is not merely legal boilerplate; it represents a promise, a contractual agreement between Kubota and the tractor’s owner, outlining the terms under which the manufacturer stands behind its product. The manual serves as the gatekeeper, defining the parameters of this assurance and stipulating the owner’s responsibilities in maintaining its validity.
-
Scope of Coverage
The warranty defines the specific components and systems covered against defects in materials or workmanship. An engine malfunction, a transmission failure, a hydraulic system leak these are the scenarios where the warranty’s scope is tested. The kubota l3901 owners manual meticulously lists these covered elements, providing clarity and preventing misunderstandings. Consider a newly purchased tractor experiencing an unexpected engine issue shortly after delivery. The warranty information, when carefully reviewed, clarifies whether this issue falls within the covered parameters, setting the stage for a claim.
-
Duration and Limitations
The warranty’s protection is not limitless; it operates within defined boundaries of time and usage. The kubota l3901 owners manual specifies the warranty period, measured in months or operating hours, whichever comes first. It also outlines limitations, such as exclusions for damage resulting from misuse, neglect, or unauthorized modifications. A farmer who significantly alters the tractor’s design, pushing it beyond its intended capabilities, may find the warranty claim denied. The manual underscores the importance of adhering to the manufacturer’s recommendations to maintain warranty eligibility.
-
Owner Responsibilities
The warranty is not a unilateral agreement; it places responsibilities on the owner. The kubota l3901 owners manual emphasizes the importance of performing regular maintenance according to the prescribed schedule, using genuine Kubota parts and fluids, and documenting all service work. Neglecting these responsibilities can void the warranty. A farmer who fails to perform routine oil changes or uses non-approved parts risks jeopardizing the warranty coverage, potentially incurring significant repair costs down the line.
-
Claim Procedures
The kubota l3901 owners manual outlines the procedures for submitting a warranty claim. It specifies the required documentation, the authorized service centers, and the steps involved in seeking reimbursement for covered repairs. A clear understanding of these procedures is crucial for a smooth and efficient claims process. In moments of mechanical distress, a prompt and well-documented claim can be critical for restoring the tractor to operational status.
Therefore, the warranty information within the kubota l3901 owners manual is more than a legal formality; it’s a framework of shared responsibility, a safety net against unforeseen mechanical issues. The kubota l3901 owners manual provides the terms, outlining the responsibilities of both parties, ensuring a transparent and equitable understanding of the warranty agreement. Adherence to these guidelines is an investment in the tractor’s long-term health and the owner’s peace of mind.
Frequently Asked Questions Regarding Kubota L3901 Operation and Maintenance
The chronicles of agricultural equipment are replete with inquiries, often born from moments of operational uncertainty or maintenance-related quandaries. These frequently asked questions, derived from real-world experiences, aim to address common points of confusion pertaining to the Kubota L3901, drawing upon the guidance provided within the official documentation.
Question 1: Where does one locate the engine serial number for the Kubota L3901?
The location of the engine serial number is a query that frequently surfaces during parts ordering or warranty verification. The number is typically stamped directly onto the engine block. While its precise location can vary slightly depending on the manufacturing run, a search around the lower left-hand side of the block often proves fruitful. Consult the component diagrams within the relevant reference for a precise indication.
Question 2: What type of hydraulic fluid is recommended for the Kubota L3901, and what are the potential consequences of using an incorrect fluid?
The specification of the correct hydraulic fluid is of paramount importance. Utilizing a fluid that deviates from the manufacturer’s recommendations can lead to diminished hydraulic performance, accelerated wear on critical components, and potential system failure. The fluid specifications section of the manual clearly states the appropriate type, typically a Universal Tractor Fluid (UTF) meeting specific ISO viscosity grades. Deviation is a gamble with the hydraulic system’s integrity.
Question 3: How often should the air filter be inspected and replaced on the Kubota L3901, particularly when operating in dusty environments?
Air filter maintenance is directly correlated to the operating environment. While the maintenance schedule outlines a standard interval, dusty conditions necessitate more frequent inspections. A clogged air filter restricts airflow, reducing engine power and increasing fuel consumption. Visual inspection, coupled with tapping the filter to dislodge accumulated debris, is recommended weekly in such environments. Replacement should occur more frequently than the standard interval if visual inspection reveals significant contamination.
Question 4: What are the recommended procedures for winterizing the Kubota L3901 to prevent damage from freezing temperatures?
Winterization protocols are vital for safeguarding the machine against the rigors of freezing temperatures. This includes ensuring adequate antifreeze protection in the cooling system, disconnecting the battery and storing it in a warm location, and treating the fuel system with a stabilizer to prevent gelling. The manual details specific steps to prepare each system for prolonged periods of inactivity in cold weather, mitigating the risk of cracked engine blocks or fuel system malfunctions.
Question 5: Where are the primary grease points located on the Kubota L3901, and what type of grease is recommended for optimal lubrication?
Proper lubrication is essential for minimizing wear and extending the lifespan of moving components. The maintenance schedule provides a lubrication chart, pinpointing the locations of all grease fittings. These typically include steering linkage, loader pivots, and PTO shaft components. The manual specifies a lithium-based grease meeting NLGI grade 2 for general-purpose lubrication. Regular greasing, following the prescribed intervals, is a cornerstone of preventative maintenance.
Question 6: What safety precautions should be observed when operating the Kubota L3901 on sloped or uneven terrain to prevent rollovers?
Rollover accidents are a significant hazard when operating tractors on uneven terrain. The safety precautions section of the manual emphasizes the importance of seatbelt use, maintaining a low center of gravity, and avoiding excessively steep slopes. Operators should also be acutely aware of ground conditions and potential obstacles. Proceeding with caution and adhering to the manual’s safety guidelines is paramount to preventing tragic incidents.
These frequently asked questions represent a fraction of the knowledge contained within the documentation. Consistent reference ensures the Kubota L3901 operates safely, efficiently, and reliably.
The subsequent section will delve into practical tips for extending the lifespan of the Kubota L3901, drawing from both the manual’s recommendations and the collective wisdom of experienced operators.
Extending the Lifespan
The testament of time is etched onto the faces of well-maintained machines, bearing witness to years of dedicated service. To ensure the Kubota L3901 becomes such a testament, adherence to key strategies, illuminated within the manual, is essential. These are not mere suggestions, but tenets of responsible stewardship.
Tip 1: Adhere Strictly to the Recommended Maintenance Schedule
A veteran farmer once remarked that neglecting the maintenance schedule is akin to slowly bleeding a machine dry. The manual’s prescribed intervals for oil changes, filter replacements, and lubrication are not arbitrary; they are calculated to preempt wear and tear. Consistent adherence ensures optimal performance and prevents costly breakdowns. The story of the farmer who skipped oil changes, only to face catastrophic engine failure, serves as a cautionary tale.
Tip 2: Utilize Only Genuine Kubota Parts
The allure of aftermarket parts can be tempting, but the manual stresses the importance of using genuine Kubota replacements. These parts are engineered to precise specifications, ensuring compatibility and performance. A mechanic recounted an instance where an aftermarket fuel filter caused irreparable damage to the fuel injection system. The savings from the non-genuine part were quickly overshadowed by the extensive repair bill.
Tip 3: Perform Thorough Pre-Operation Inspections
Before each use, a comprehensive inspection is crucial. The manual provides a checklist of items to examine, including fluid levels, tire pressure, and the condition of safety devices. An operator who diligently performs these checks can identify potential problems before they escalate. The anecdote of the farmhand who discovered a loose hydraulic line during a pre-operation inspection, averting a major hydraulic failure, underscores the value of this practice.
Tip 4: Protect the Machine from the Elements
Exposure to harsh weather can accelerate deterioration. The manual recommends storing the Kubota L3901 in a sheltered location whenever possible. Protecting the machine from rain, snow, and direct sunlight helps to prevent rust, corrosion, and UV damage. A rancher who consistently stored his tractor indoors noted that it maintained its original condition for far longer than comparable machines left exposed to the elements.
Tip 5: Ensure Proper Tire Inflation
Maintaining correct tire pressure is essential for optimal performance, fuel efficiency, and tire lifespan. The manual specifies the recommended tire pressure for various operating conditions. Underinflated tires can lead to increased wear, reduced traction, and potential damage. A tire specialist emphasized that properly inflated tires not only improve performance but also enhance safety.
Tip 6: Clean the Machine Regularly
Accumulated dirt and debris can accelerate wear and tear. The manual advises regular cleaning to remove mud, dust, and other contaminants. Pay particular attention to cooling fins, air intakes, and hydraulic components. A technician noted that a clean machine is not only aesthetically pleasing but also easier to inspect for potential problems.
Tip 7: Avoid Overloading the Tractor
The Kubota L3901 has a defined capacity. Overloading the tractor can strain the engine, transmission, and hydraulic system, leading to premature failure. The manual specifies the maximum load limits for various implements and attachments. Respecting these limits protects the machine from undue stress.
Adherence to these practices, detailed within, transforms the Kubota L3901 from a mere machine into a reliable partner, capable of weathering the rigors of agricultural labor for years to come. The documentation is not just a guide; it’s a covenant for longevity.
The subsequent and concluding section will summarize the importance and usefulness of this comprehensive understanding about “kubota l3901 owners manual”.
A Legacy of Reliability, Forged in Understanding
This exploration has navigated the multifaceted landscape encompassed by the kubota l3901 owners manual. From meticulous maintenance schedules to intricate component diagrams, from stringent safety protocols to precise fluid specifications, each element has been examined, its significance unveiled. The manual is revealed as more than a mere collection of instructions; it is a comprehensive guide, a repository of accumulated knowledge designed to ensure the longevity, safety, and optimal performance of this essential machine. A story echoes through the farming communities. A farmer, once skeptical, faced an engine issue miles away from town. The resource, readily available, provided diagnostic steps and repair steps which saved his time. He was able to get back to work, thanks to the reliability of kubota l3901 owners manual.
The Kubota L3901 stands as a testament to engineering prowess, but its potential is fully realized only when wielded with informed competence. The kubota l3901 owners manual is the key to unlocking that potential, transforming a collection of mechanical parts into a reliable and enduring partner. Let those who operate and maintain this machine embrace the wisdom contained within its pages, not as a chore, but as a pathway to ensuring a legacy of reliability that echoes through generations. The manual is a shield, a guide, and an invitation to a partnership with a machine built to last. Seek its knowledge and keep pushing, for tomorrow awaits on the field.
